Samar Enterprises

• Electronic ignition
• Touch and stop switch
• Fuel primer for easy starting
• Stratified air scavenging system to save fuel
• Water supply with intake filter and fine adjustment for Adequate dust protection
• High quality driving belt does not require tensioning once the required tension is adjusted
• Maximum cutting depth 110mm

• 40Vmax X2 (80Vmax) XGT BL AFT AWS AVT SOFT NO LOAD Cordless 52 mm (2-1/16″) 21.4 J Rotary Hammer, SDS-MAX Bits
• Higher power than corded model HR5212C, and low vibration for easier machine control
• Powerful BL motor delivers 21.4 J of impact energy to handle the most demanding applications
• Active Feedback sensing Technology (AFT) turns the motor off if bit rotation is suddenly forced to stop
• Vibration to operator’s hands is reduced by AVT (Anti-Vibration Technology using Active dynamic vibration absorber, Vibration absorbing housing and Soft no-load)
• Auto-start Wireless System (AWS) connects to compatible vacuum cleaners with Bluetooth
• Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
• Soft start suppresses start-up reaction for more control and better accuracy
• Twin LED lights with preglow and afterglow functions for better illumination
• Variable speed control dial enables user to match the speed to the application for greater versatility
• Torque limiting clutch engineered to minimize gear damage by automatically disengaging gears if the bit binds
• Depth gauge for increased drilling consistency
• Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions

• Achieves a cutting depth of 127mm and a high cutting speed that overwhelms that of EK7651H, while featuring low vibration that the competing models cannot achieve
• Low vibration mechanism; Equipped with anti-vibration housing with built-in spring to absorb the vibration from cutting to integrated front and rear handles
• 40Vmax X2 (80Vmax) XGT battery and BL motor for increased cutting efficiency
• Max cutting depth: 127mm (5″); 8-10 rebars of ø16 mm (#5) can be cut together in one shot
• WetGuard/ IPX4-compatible; High water-resistance allows to operate the machine even if it is wet with water
• Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh job site conditions
• Active Feedback sensing Technology (AFT) turns the motor off if rotation speed suddenly slows or wheel is forced to stop
• LED job light; can be turned on/off with a button conveniently located on the rear handle; automatically shuts off when the switch trigger is not pulled for 60 seconds
• Electric brake; having electric brake system that engine power cutters do not have
• Overload indicator lamp; alerts operator of overload with a red blinking LED; reduces unnecessary battery recharging by overload protection
• Lock-off button minimizes accidental start up
• Water supply kit can be connected; the hose is designed to run inside the tool housing to minimize from being caught in objects
• Battery protection circuit protects against overloading, over-discharging and over-heating

• High power cordless lawn mower powered by 64Vmax (57.6V) Li-Ion battery
• Lightweight design with a plastic cutting deck for increased maneuverability
• Plastic cutting deck allows for lightweight design to increase maneuverability in turns, preparation, storage and more
• 3 cutting modes (Normal/ Soft no-load/ Noise reduction)
• Normal mode; Suitable for works that require power, such as cutting overgrown or dense turf, or works that require air volume, such as cleaning of fallen leaves
• Soft no-load mode; the rotation speed automatically changes according to the load on the machine. Therefore, it is possible for the machine to provide energy-saving operation according to the density of turf and the speed at which user pushes the machine.
• Noise reduction mode; Optimal for use in noise-sensitive environments such as residential areas
• Cordless foldable handle for quick and compact storage
• 4 in 1 (Cutting/ Collecting/ Mulching/ Rear discharge)
• Tool-less foldable handle
• Can be stored vertically
• BL motor designed for high power cordless mowers
• Cutting height is adjustable by one handle
• Handle height adjustment (2 stages)
• Electric brake

Additional Information:

• Production Capacity: 143005
• Delivery Time: 1 DAY
• Packaging Details: CARTOON

• Higher torque and more compact than DTW1001
• High torque but compact overall length for easy handling and control
• Electronic 4 stage impact power selection for added versatility
• 3 modes of reaction time for automatic stop available both in forward and reverse rotation modes
• Trigger switch with full speed mode allows for less hand and finger fatigue
• Style of socket retention: C ring
• Reverse Rotation Auto Stop Mode stops after the bolt/nut loosened enough
• Twin LED job light ×2 with preglow and afterglow functions; Even when a large socket of M27 or larger is attached to the tool, another LED job light added above the battery provides bright illumination on the socket and workpiece
• Powered by 40Vmax XGT Li-Ion battery
• BL motor delivers 1,800 N·m (1,330 ft.lbs.) of max torque and 2,050 N∙m (1,510 ft.lbs.) of nut-busting torque
• BL motor is electronically controlled to optimize battery energy use for longer run time per charge
• BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
• Excellent performance in continuous heavy duty applications
• Ergonomically designed handle with rubberized soft grip
• XPT (eXtreme Protection Technology); For use in outdoor applications or harsh environments, protection from dust and dripping water is enhanced
• Electric brake stops the rotation gently but fast, allowing user to quickly resume operation
• Reversing switch is conveniently located
• Durable, reversible belt clip convenient for temporary tool hanging
• Battery protection circuit protects against overloading, over-discharging and over-heating

• 40Vmax XGT BL Cordless 18 Ga 40 mm (1-5/8″) Brad Nailer
• Compact design for high maneuverability
• High power to drive brad nails up to 40 mm; 35 mm into hard materials such as red oak
• Drives 6 different lengths of 18 gauge pin nails (15 mm (5/8″), 20 mm (3/4″), 25 mm (1″), 30 mm (1-3/16″), 35 mm (1-3/8″) and 40 mm (1-5/8″)); magazine capacity up to 100 nails
• Quick firing thanks to BL motor
• BL motor quickly re-compresses the spring for next firing
• Slim nose enables to drive nails securely into groove of narrow baseboard like 4 mm
• Contact arm mechanism enables “continuous nailing” and “drag nailing”
• Anti-dry fire mechanism engineered to minimize driving blanks and damage to work surface
• Toolless depth adjustment for precise flush and countersink finish
• Built-in LED light illuminates the work area
• Well-balanced design for reduced operator fatigue
• Ergonomically designed handle with soft grip provides increased comfort
• Spring-loaded driving mechanism allows for a compact tool with light weight
• Trigger-lock button minimizes accidental start up
• Battery protection circuit protects against overloading, over-discharging and over-heating
• Durable, reversible belt clip convenient for temporary tool hanging

• Excellent performance in continuous heavy duty applications
• Outstanding drilling speed; Delivers 20% or more higher speed than previous model
• Increased max speed (0-2,600 RPM) in High mode for faster drilling speed in light duty applications
• Variable 2-speed transmission (0-650 & 0-2,600 RPM) for a wide range of drilling, fastening and hammer drilling applications
• Compact overall length for easy handling and control
• Active Feedback sensing Technology (AFT) turns the motor off if bit rotation is suddenly forced to stop
• Electronical clutch (41/21 settings in Low/High mode) allows for clutch setting in the torque range which cannot be covered with mechanical clutch
• Jog dial for easy adjustment of fastening torque; with digital display for visual confirmation of selected torque
• Electric brake for maximum productivity and increased operator safety
• LED job light with afterglow feature illuminates the work area
• All metal 13 mm self-ratcheting chuck for improved bit gripping strength and durability
• Keyless chuck for quick and easy bit installation and removal
• Depth gauge for increased drilling consistency
• XPT (eXtreme Protection Technology) is engineered for improved dust and water resistance for operation in harsh conditions
• Reversing switch is conveniently located
• Durable, reversible belt clip convenient for temporary tool hanging
• Battery protection circuit protects against overloading, over-discharging and over-heating